Telin Machinery enables transmission around the world
You are here: Home » Products » European taper bushing 3535-70 for New energy equipment

Product Category

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

European taper bushing 3535-70 for New energy equipment

Euro Cone Sleeve 3535-70 is a common mechanical part used to connect and fix shafts and bearings. Here are some common facts about Euro Cone Set 3535-70:



Size: The size of the European standard taper bushing 3535-70 is 35 x 35, which means that the inner diameter and outer diameter are 35 mm. Material: European standard taper bushing 3535-70 is usually made of high-strength metal materials, such as steel or alloy steel. This material provides sufficient strength and stiffness to meet the requirements of the drive train.
Availability:
Quantity:
  • TeLin

product advantage


The product advantages of the European standard taper bushing 3535-70 are as follows:

1. High strength and rigidity: European standard taper bushing 3535-70 is usually made of high-strength metal materials, which can provide sufficient strength and rigidity to withstand the requirements of high loads and high speeds.

2. Precise connection and fixation: Euro standard taper bushing 3535-70 has precise dimensions and manufacturing process, which can ensure tight connection and firm fixing with shafts and bearings, reducing looseness and vibration in motion.

3. Simplified installation and maintenance: Euro taper bushing 3535-70 is relatively simple to install and is usually fixed to the shaft by pressing in or hot mounting. During maintenance, the cone sleeve can be replaced without replacing the entire shaft or bearing.

4. Good adaptability: European standard taper bushing 3535-70 has standardized sizes and specifications, which can be compatible with other mechanical parts that meet European standards. This makes them suitable for a wide range of different mechanical equipment and drive systems.

5. Iprove transmission efficiency: The precise connection and fixing of the European standard taper bushing 3535-70 can reduce the energy loss in the transmission system, improve the transmission efficiency, and make the system more efficient.


product advantage


It is important to note that product benefits may vary depending on the application and design. When selecting and using the European standard taper bushing 3535-70, it is recommended to evaluate according to the actual needs and requirements, and refer to the product's specification or communicate with the manufacturer to obtain accurate product advantage information.

Euro standard cone sleeve 3535-70 is usually used in mechanical transmission systems, and its main product uses include but are not limited to the following aspects:

1. Coupling: European standard cone sleeve 3535-70 is often used in couplings, connecting two shafts to transmit torque and turning power. They provide reliable connection and transmission functions to ensure the proper operation of machinery and equipment.

2. Transmission: European standard cone sleeve 3535-70 can also be used in transmission devices, such as reducers, transmissions, etc. They are able to connect the driven and driven shafts for different speeds and torques.

3. Mechanical equipment: European standard cone sleeve 3535-70 is commonly found in various mechanical equipment, such as pumps, fans, compressors, conveyors, etc. They connect drive and transmission components to ensure the proper operation of the equipment.

4. Industrial application: European standard cone sleeve 3535-70 is also widely used in industrial fields, such as metallurgy, mining, chemical, papermaking and other industries. They are capable of connecting and transmitting power to meet the needs of different industrial equipment.

In short, the European standard cone sleeve 3535-70 plays an important role in various fields, used to connect and transmit torque, realize the operation and transmission function of mechanical equipment.


product operation guideline


The product operation guide of the European standard cone sleeve 3535-70 is as follows:

1. Preparation before installation: Before installing the European standard cone sleeve 3535-70, make sure that the surface of the shaft and sleeve hole is clean, and check whether there is obvious damage or impurities. Make sure you select the right sleeve size and type to meet the drivetrain requirements.

2. Install the sleeve: Align the sleeve end of the European standard cone sleeve 3535-70 with the shaft to be connected, and ensure that the shaft meshes correctly with the socket hole. Depending on the design of the sleeve, the sleeve is fixed to the shaft using appropriate tools.

3. Adjust the sleeve gap: If there is a sleeve gap in the transmission system, according to the design of the sleeve, adjust the position of the sleeve appropriately so that it is within the allowable range.

4. Lubrication and maintenance: Ensure adequate lubrication of the Euro Cone Sleeve 3535-70 and the corresponding shaft, and use the appropriate lubricant according to the manufacturer's recommendations. Check the lubrication regularly and replenish or replace it as needed.

5. Monitoring and maintenance: During the operation, regularly monitor the operating status of the European standard cone sleeve 3535-70, and pay attention to whether there is abnormal vibration, noise or temperature rise. If an abnormality is found, it should be stopped for inspection in time, and repaired or replaced as needed.

It should be noted that the above operation guide is for reference only, and the specific operation steps and precautions should be confirmed according to the specifications of the actual product or the information provided by the manufacturer. Following the correct operating guidelines can ensure the proper operation and service life of the Euro Cone Sleeve 3535-70.


FAQ and answer


Problem 1: The sleeve is worn or damaged.

Solution: Regularly check the wear of the sleeve, if there is wear or damage, replace the sleeve in time. Ensure that the appropriate sleeve material and strength are selected to suit the workload and environment.

Problem 2: The sleeve axial offset is outside the allowable range.

Workaround: Check the cause of the axial offset, such as whether the shaft is installed correctly or a problem with the shaft itself. The position of the axis can be adjusted so that it is within the permissible range. If the problem persists, the sleeve may need to be replaced.

Problem 3: Poor sleeve lubrication.

Solution: Check the lubrication of the sleeve to ensure adequate lubrication. Use the appropriate lubricant according to the manufacturer's recommendations. Check lubrication regularly and replenish or replace lubricant as needed.





Previous: 
Next: 
Guangzhou Telin Machinery Parts Co., Ltd. is a technology-based company integrating research and development, production, and sales.

Quick Links

Contact Us

 Phone : +86-02085820219
  Tel : +86-18026416619
 E-Mail : sales@gztelink.com
  Address : 101, 1st Floor, No. 31-3 Qianfeng Village South Road, Shiji Town, Panyu District, Guangzhou
Send Inquiry
Copyright © 2023 Guangzhou Telin Machinery Parts Co., Ltd. All rights reserved. | Sitemap | Privacy Policy | Support By Leadong